| 序號 No. | 部位 Part | 材料 Material |
| 1 | 主體 Body | 天然橡膠(NR)、氯丁橡膠(CR)、丁基橡膠(IIR)、丁腈橡膠(NBR)、氟橡膠(FKM)、三元乙丙橡膠(EPDM) |
| 2 | 內、外襯 Inner & Outer Rubber | 天然橡膠（NR） 氯丁橡膠（CR）丁基橡膠（IIR） 丁腈橡膠（NBR）氟橡膠（FKM）三元乙丙橡膠（EPDM）聚四氟乙烯（PTFE） |
| 3 | 主體骨架 Body Carcass | 尼龍簾布 Nylon cord fabric |
| 4 | 增壓環 Reinforcing Ring | 多股鍍銅鋼絲 Multi-strand coppering steel wire |
| 5 | 螺紋活接頭 threaded union rubber joint | 鑄造、鍛造碳鋼 Cast and forged carbon steel(Q235)、不銹鋼 Stainless steel(201、304、316、321)、塑料 Plastic(CPVC、PVDF、PPH、UPVC、RPP) |
| 項目Item |型號Medol | KST-L-1 | KST-L-2 | A、如介質油，酸堿物質? B、工作溫度有特殊要求? C、也可來函來圖定制? D、訂貨時需說明? A. If media is oil, acid or alkali.? B. If special requirements for working temperature? C. If OEM orders with drawings or samples? D. Please Inform us about above when ordering |
|
| 工作壓力MpaWoring pressure | 1.0(10) | 1.6(16) | ||
| 爆破壓力Mpa Burst Pressure | 2.0(20) | 3.0(30) | ||
| 真空度 Kpa Vacuum | 53.3(400) | 86.7(650) | ||
| 適用溫度℃Applicable Temperature | -20℃~+115℃（特殊可達-30℃~+250℃）-20℃~+115℃(-30℃~+250℃ under special conditions) | |||
| 適用介質Applicable Medium | 空氣、壓縮空氣、水、海水、熱水、油、酸、堿等Air, compressed air, water, sea water, oil, acid, alkali, etc. | |||
| 注：主要零件材料同KXT型 Note: the materials of main parts are the same with those of KXT type | ||||
| 公稱通徑DN Nominal Diameter （mm） |
長度 LengthLmm |
軸向位移 Axial displacement mm |
橫向位移 Haorizontal isplacement mm |
偏轉角度 Angular deflection(a1+a2)° |
|||
| mm | 英寸inch |
A型 | B型 | 伸長Extension | 壓縮Compression | ||
| 15 | 0.5 | 180 | 200 | 5~6 | 22 | 22 | 45 |
| 20 | 0.75 | 200 | 200 | 5~6 | 22 | 22 | 45 |
| 25 | 1 | 210 | 200 | 5~6 | 22 | 22 | 45 |
| 32 | 1.25 | 210 | 200 | 5~6 | 22 | 22 | 45 |
| 40 | 1.5 | 220 | 200 | 5~6 | 22 | 22 | 45 |
| 50 | 2 | 220 | 220 | 5~6 | 22 | 22 | 45 |
| 65 | 2.5 | 240 | 240 | 5~6 | 22 | 22 | 45 |
| 80 | 3 | 285 | 285 | 5~6 | 22 | 22 | 45 |
|
注：1、特殊要求可按用戶圖紙制作，螺紋活接頭標準采用（ISO、ASME、BS、JIS等）螺紋標準生產。橡膠球體可做天然橡膠、三元乙丙橡膠、氯丁橡膠、丁基橡膠、丁腈橡膠、氟橡膠等。? Notes:1. For OEM orders with special requirement, threaded unions should be made according to customers' drawings. Thread standard can be ISO, ASME, BS, JIS, etc. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc. | |||||||